The Ravel RE-2AS is a compact EN 54-16 certified public address and voice alarm system that ensures a fast, safe and controlled emergency evacuation. RE-2AS is the most versatile and cost effective PA/VA system, thanks to its cutting-edge features, excellent audio quality and flexibility in minimum space. It has 2 class D amplifiers, 6 zones, 3 audio inputs, 6x6 audio matrix, DSP and LCD display. The system can be configurated without software or PC, thanks to the Plug & Set mode for PA/VA. Audio inputs and automatic mixing allow high versatility for PA use in small installations. RE-2AS has an EN 54-4 battery charger and can operate with one 12V battery. This feature and its advanced power saving control reduce maintenance costs to the maximum. A Wall & Rack innovative design makes RE-2AS suitable for wall mounting and rack integration.


  • 3 audio inputs.
  • Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable
  • 2 class D amplifiers with two configurations for 100V/70V lines up to 500W
  • Digital audio matrix 6x6, expandable
  • 4 pre-amp outputs for external PA amplifiers connection.
  • DSP: 3/7-band input/output parametric equalizer, loudness, Ravel sound enhancer, independent volume control per each input and output master.
  • Access control by LCD display
  • Control for up to 16 Ravel AT6 attenuators.
  • 8+2 GPIO ports, supervised for integration with Fire Alarm Control Panel.
  • Interface MODBUS RTU RS 485 Half duplex
  • Certified under EN 54-16, EN 54-4 and EN 60849 standards.
  • Backup amplifier included.
  • 10 minutes storage for pre-recorded messages.
  • Failure detection and indication in all emergency functions.
  • Fire Alarm Control Panel integration.
  • Double player for pre-recorded evacuation messages.
  • Manual control of emergency states with access control.
  • Emergency log.
  • Loudspeaker lines supervision.
  • Line terminator without return for supervision.
  • Electrical Specifications
    Power supply 100 - 240V~ 50/60Hz
    Power consumption 350W max / 100W at 1/8 output powe
    Frequency response 80 – 20000Hz +/-1dB
    Signal to noise ratio SNR~95dB, A-weighted
    Distorsion factor < 0.1% according to IEC 60268 -15dB. 0,01% pre-out outputs
    Gain adjustment per channel -100dB +10dB, 1dB steps
    DSP Integrated - 48 kHz, 24 bits - 344 MIPS
    BGM audio inputs Up to 3 x balanced audio 1 Vrms. 10 KΩ, 3 Pin, Euroblock type
    Priority audio inputs 2 x balanced audio 1 Vrms. 10 KΩ, 4 Pin, Euroblock type (GPIO)
    General control (GPIO) 2 x control I/O, 0-5 V, 100 Ω, in PRIO audio inputs
    Ravel ACSI Bus 1 x balanced audio 1 Vrms. 10 KΩ, RJ-45 female, total 1000m / 3280,84ft
    ACSI-Link connectivity 2 x balanced audio 1 Vrms. 10 KΩ, RJ-45 female, total 500m / 1640,42ft
    Pre-amp audio outputs 4 x balanced audio 1 Vrms. 100 Ω, 3 Pin, Euroblock type
    Attenuators control 6 x override 24V DC, 6 x 30mA, 2 Pin, Euroblock type (4 pin connector)
    Emergency control inputs 8 x 0 - 5V DC, monitored inputs, 2 Pin, Euroblock type (4 pin connector)
    Emergency control outputs 2 x contact closure output, NO, max 60V DC 130mA, 2 Pin, Euroblock type (4 pin connector)
    Virtual matrix 15 x 24 maximum
    Amplifier 2 x 500W D class (250Wrms x 2) @ 70 / 100V. Min load 20 Ω
    Backup amplifiers 1 backup amplifier with automatic priority according to EN 54-16r
    Speaker line outputs 6 x 100V audio. Min. impedance: 20 Ω 500W (outputs 1 and 2), 80 Ω 120W (rest), 2 Pin, Euroblock type
    Output power 500 W (Pink Noise 1/8). 200 Wrms according to EN 54-16
    Protection Over-temperature, infrasonic, short circuit, slow start-up, overload
    Emergency power 181x76x167mm battery housing, up to 22Ah
    Battery charger Integrated, smart charging up to 3 amperes
    Display Backlit LCD 2 rows x 16 characters
    Operation conditions -5°C to +45°C / 23°F to 113°F 5% to 95% relative humidity (without condensation)
    Finish Materials : Fe y AL
    Colours RAL7016 and RAL9005
    Weight 7.5 Kg / 15.76 lb
    Output power 500 W (Pink Noise 1/8). 200 Wrms according to EN 54-16
    Dimensions (W x H x D) 453mm x 88mm x 455mm / 18.2” x 3.46” x 18"
    Accessories Male Euroblock connectors, installation screws, 4 x rubber foot

    PUBLIC ADDRESS & VOICE ALARM SYSTEM

    Download Datasheet.

    ...