Addressable photoelectric smoke detectors are designed to work with Addressable panel. These photoelectric smoke detectors are lowprofile, polarity free, and have dual LED’s for360 o visual indication. The LED’s are blinking in normal operating condition whereas the steady state indicates fire status. It has an unique chamber designed to sense smoke produced by wide range of sources of combustion with insect free. The detectors sensitivity can be programmed through fire alarm control panel. It has a unique drift compensation where the detector adjusts its normalreference basedonenvironment conditions


  • UL listed and NFPA standard.
  • Polarity free, and Dual LED’s for 360 visibility
  • Advanced detection and communication protocol.
  • Easy to install.
  • Sleek low-profile housing design.
  • Regular 100mmbase.
  • Address set by 8 digit DIP switch.
    • Electrical Specifications
    Operating Voltage 17 ~ 28V DC
    Reset Voltage Less than 3V.
    Standby Current 500 µA.
    Start up Time 30 sec.
    Alarm Current 5 mA .
    Remote Output 2mA maximum open collector
    Smoke Sensitivity (2.12 ± 0.61) % obs/ ft (High: 1.1% obs/ft; Medium: 1.4% obs/ft; Low: 2.3% obs/ ft).
    Air Velocity 0 – 4000 fpm.
    Detector Spacing 9 meters
    Operating Temperature -10o C to 37.8o C.
    Storage Temperature -10 o C to 60 o C.
    Humidity 0 – 95% RH, non-condensing
    Mechanical Specification
    Dimension 46 H x 100 D (mm)
    Weight 150 g with base
    Material FR ABS plastic
    IP Rating IP-42

    ADDRESSABLE PHOTOELECTRIC SMOKE DETECTOR

    Download Datasheet.

    ...