The Monitor Module is intended for use in intelligent, two-wire systems, with inbuilt isolator where the individual address of each module is selected using the DIP switches and it utilizes a single address. This module is been supervised for the status (Alarm / Normal / Open). This module allows the facilitates third-party devices to interface with Ravel addressable panels. Monitor module shall use one electrically supervised inputs to monitor flow switches, pull stations, sprinkler valves, fire dampers etc. The red blinking LED indicates normal operating condition and the steady state for activated condition.
The panel status shall be visually indicated in unambiguous color with distinguished inbuilt audible tone. This system can operate as a standalone or connect to 16 network nodes with network interface card
| Electrical Specifications | |||
|---|---|---|---|
| Operating Voltage | 24 VDC Nominal | ||
| Alarm Current | |||
| 2 mA (max) | |||
| Standby Current | 0.7 mA | ||
| End of Line Resistor | 47K ½ watt | ||
| Wiring Resistance | 100 Ohms (max) | ||
| Wiring Style | Class B | ||
| Temperature Range | 0 – 49° C / 32 – 120° F | ||
| Storage Temperature | 0 – 60° C / 32 – 140° F | ||
| Humidity | 93 ± 2% RH (non-condensing) | ||
| Mechanical Specification | |||
|---|---|---|---|
| IP rating | IP 40 | ||
| Dimensions |
(76.6L X 71.6W X 22D) mm (without gang holder) (125.5L X 85.5W X 22.2D) mm (with gang holder) |
||
| Material | FRABS | ||
| Weight | 70 g | ||
