The Dual Monitor Module facilitates third party devices to interface with Ravel addressable panels. DIP switches are provided for addressing of the module. This module is been supervised for the status (Alarm / Normal / Open). The dual monitor module shall use two successive addresses from the set address and this module shall use two electrically supervised inputs to monitor flow switches, sprinkler valves, fire dampers etc., The red blinking LED indicates normal operating condition and the steady state for activated condition.

The panel status shall be visually indicated in unambiguous color with distinguished inbuilt audible tone. This system can operate as a standalone or connect to 16 network nodes with network interface card

  • UL listed 864 10th edition.
  • 2 Supervised Conatct Monitoring Circuit.
  • Status LED.
  • Inbuilt isolator.
  • SLC communication with the panel.
  • DIP switches for addressing.
  • Address between 1 – 249.
  • Single gang box.
    • Electrical Specifications
    Operating Voltage 24 VDC Nominal
    Alarm Current
    2.3 mA (max)
    Standby Current 1.1 mA
    End of Line Resistor 47K ½ watt
    Wiring Resistance 100 Ohms (max)
    Wiring Style Class B
    Temperature Range 0 – 49° C / 32 – 120° F
    Storage Temperature 0 – 60° C / 32 – 140° F
    Humidity 93 ± 2% RH (non-condensing)
    Mechanical Specification
    IP rating IP 40
    Dimensions (76.6L X 71.6W X 22D) mm (without gang holder)
    (125.5L X 85.5W X 22.2D) mm (with gang holder)
    Material FRABS
    Weight 70 g

    ADDRESSABLE DUAL MONITOR MODULE

    Download Datasheet.

    ...