With no specialist tools or knowledge needed for installation and operation, the Eazy Beam is a standalone beam detector that prioritises ease of installation. Using the Eazy Beam, it couldn’t be easier to bring the benefits of beam detection to your application:

  • Auto-Aligns - using the integrated user interface - just steer the laser onto the Reflector, then at the flick of a switch, it aligns itself. 8 times faster than previous detectors
  • One person installation – everything can be done by one person
  • One standalone product – no specialist tools required; minimal prior knowledge and training needed
  • Alignment of a detector in a Minute

  • Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold.
  • Alignment mode switch, alignment directional buttons and configuration switches for alarm response threshold.
  • System status : Green LED flashing every 10 sec in normal condition; Red LED flashing every 10 sec in alarm condition; Yellow LED flashing every 10 sec for obscuration or every 5 sec for contamination in Fault condition.
  • Flat front face with enclosed optics. Cleaning the optics does not affect alignment.
  • Integrated visible laser and auto-alignment for ultimate ease of alignment.
  • Integrated user interface.
  • Prevent nuisance alarms with Light Cancellation Technology™ which compensates for sunlight and artificial light sources
  • Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
  • Building Movement Tracking™ continuously maintains alignment when buildings settle or flex due to temperature variations.
  • Clean detectors quickly and easily without affecting alignment.
  • Low power consumption; can be powered from the loop.
  • Prevent interference between beams with Dynamic Beam Phasing; install beams facing each other or in irregular configurations
  • Detection range of up to 120m.
    • Electrical Specifications
    Operating Voltage 14 – 36 VDC
    Operating Current All operational modes – 5mA; Fast alignment mode – 33mA
    Operating Temperature -20 – 55° C / -4 – 131° F
    Storage Temperature -40 – 85° C / -40 – 185° F
    Relative Humdity (non -condensing or icing) 93 ± 2% RH (non-condensing) at 32 ± 2° C / 90 ± 3° F
    IP Rating IP55
    Housing Flammability Rating UL94 V0 polycarbonate
    Optical Specification
    Fault level / Rapid obscuration (Δ ≤ 2 seconds) ≥85%
    Operating Current All operational modes – 5mA; Fast alignment mode – 33mA
    Maximum angular misalignment of Reflective Detector ±0.5°
    Storage Temperature -40 – 85° C / -40 – 185° F
    Maximum angular misalignment of Reflector ±5°
    Maximum angular alignment of Reflective Detector ±4.5° (±70° with adjustment bracket accessory)

    LOOP CARD FOR AARAL

    Download Datasheet.

    ...